Selection and application of optical fiber jumper

AddTime£º09-09-2016   Author£ºadmin

     According to the optical fiber jumper terminal type mainly has three types: SC-SC, ST-ST, ST-SC. According to the types of fiber, there are mainly two types of single mode fiber and multimode fiber. The jump length is 10m, 5m, 3M, 2m, 1M, 0.5m etc.. The material can be divided into ordinary type, ordinary flame retardant type, low flame retardant type, etc.. According to the building fire protection rating and the requirements of the material, the integrated wiring system to take appropriate measures. Put cables in the building area and the shaft is flammable, in large public places should be used in flame retardant, low smoke, low toxicity of cables.

       Optical fiber has been widely used in the communication room, FTTH, local area network, optical fiber sensor, optical communication system, optical fiber connection transmission equipment, national defense etc.. Use and cable television network, telecommunication network, computer optical fiber network and test equipment. Subdivision is mainly used in seven aspects

   LAN, LAN

   Two. Optical fiber data transmission

    Three. Optical fiber CATV

     Four. Test equipment

     Five. Optical fiber communication systems

     Six. Optical fiber sensor

    Seven. Optical access network

    Optical fiber jumper (also called optical fiber connector) refers to both ends are mounted on the connector plug is used to achieve the optical path connection. One is called the pigtail plug. A protective layer is thicker, the connection between the transmitter and the generally used in the terminal box. Optical fiber (fiber optic connector) and similar coaxial cable, but no mesh shielding layer.