Fiber optic jumper for a long time will decay
AddTime£º08-07-2016 Author£ºadmin
Fiber optic jumpe we are not strange, it is used when brought great convenience to our system, but it would have been like this? After long time use will decay? This is a very concern of the people.
As for the fiber optic jumper wire, it is used to do crossover cable from the device to the optical fiber link. Have thicker protective layer, commonly used in optical transceiver and the connection between the terminal box. Fiber optic jumper wire and coaxial cable, just don't mesh shielding layer. The center is the spread of the light glass core. In multimode optical fiber core diameter is 15 mu m ~ 50 microns, roughly the comparative with the thickness of a human hair. And single-mode fiber core diameter of 8 microns ~ 10 mu m. core surrounded by a layer of refractive index is lower
Will jump line as permanent as circuit aging will decay? Actually learned about the structure of the fiber optic jumper there would be no such confusion, the middle is the fiber core, and glass envelope is outside, and a plastic layer outside the protection, with the passage of time, the outside plastic coat will be aging, protective layer destruction, the spread of jump line rate will decline.
Optical fiber in use there are a few points need to be aware of:
1. Don't use excessive bending and around the ring, this would increase the light attenuation in the transmission process.
2. The fiber optic jumper after use must use cases to guard the fiber optic connectors, dust and oil pollution can damage the optical fiber coupling.
3. If one thousand optical fiber connector is dirty, you can use cotton swabs dipped in alcohol clean, otherwise it will affect the quality of communication.